Antifouling Thin Film Swiss, 2000 ml, Graphite

This antifouling is compatible with the old VC-17 which is now prohibited.

THIN FILM SWISS de schiffsfarben.ch is a new, slim and fast drying antifouling.

It can be applied directly and without sanding on different hard antifouling paintings with or without PTFE, as well as on VCOFFSHORE EU ​​and VC17M.

With its smooth and hard surface, it has a low friction and therefore also suits fast motor boats and racing sailboats.

It is approved for professional and private use on freshwater and salt water boats.

Packaging: 0.75 L, 2 L

Yield: approx. 9 - 10 m² / liter

Application:

Step 1: Clean the hull with the high pressure cleaner and dry it (if algae or limestone residues adhere, rub them with a red non-woven pad and clean them)

Step 2: Mix Thin Film Swiss with the Sacper Dioxide sachet provided and add 5 to 10 % of VC-General Thinner.
Step 3: Apply the first diluted layer of Thin Film Swiss in thin layer and make it penetrate a Little.
Step 4: After a drying time of about 1.5 hours, apply the second non -diluted layer of Thin Film Swiss with a roller.
Step 5: A third layer of Thin Film Swiss is Recommended that for complete reconstructions, in combination with the Primer VCTAR2.