The 110-230V battery charger is specially designed for TEMO · 1000 motors and is initially delivered when purchasing your engine. With a power of 205 Watts , the charger consumes approximately 5Ah in 220V AC for a complete battery recharge in approximately 5h . With the charger 110-230V, you can recharge your TEMO · 1000 on a sector outlet (220V).
Use advice : Before connecting your battery, be sure to use the charger in a ventilated location and not cover the battery or charger to avoid overheating when loading. Be sure to connect the connector to the battery before connecting it to the sector. Note that the TEMO 1000 battery charging connector is waterproof and IP67 certified. However, always check that the connector is dry and that the charger itself is not wet before proceeding to the charge to avoid any short circuit and sparks. When the load is complete after about 5 hours (in the event of a completely empty battery), the light indicator of the charger goes from red (during load) to green, indicating that your temo · 1000 is completely loaded. You can follow the progress of the loading thanks to the light lights located on the top of the battery. Once the load is finished, all the lights are green. To disconnect the charger, first remove the mains outlet, then the battery -connected connector.