Tiwal 2

The Tiwal 2 is a small inflatable sailboat. It is designed to be carried on a cruising boat. Light in weight, at just 40 kg, it fits in two easy-to-store bags. Its assembly is very fast: 15 minutes maximum.

For single-handed sailing or with a child, the Tiwal 2 is a delight for the whole crew, young and old alike. With the Tiwal 2 you’ll want to stay in the anchorage!

The Tiwal’s inflatable hull consists of a high-pressure Drop Stitch central compartment and two wing-shaped compartments on each side. The central part has a V-shaped hull and a round scow-shaped bow.

An anodized aluminum frame is inserted at the front to attach the mast foot and daggerboard, and at the stern to attach the rudder supports. All this can be assembled without tools, with Velcro straps.

The Tiwal 2 sail is manufactured by North Sails, the world's leading sailmaker. It is a versatile Dacron sail, with a surface area of 5.6m², which allows you to sail in varied wind conditions.

It furls around the mast to make it easier to store. It is boomless for better safety on board and is equipped with battens that give it its power. Thanks to its sleeve it slides onto the 4.90 m C50 carbon mast. The mast is in five sections and stows in the same bag as the hull.

This Tiwal 2 reefable sail is made by North Sails, the world’s leading sailmaker. Made in Dacron and monofilm, it allows you to choose between a sail area of 6 m² or 4.80 m², depending on wind conditions and the weight of the crew.

The Tiwal 2’s reefable sail has no boom, for increased safety for the sailors on board. It is equipped with two battens in the top panel for improved sail-shape and efficiency, as well as making it a square-topped sail.

Parts included in the pack:
PVC inflatable hull - 3 separate chambers:
- 1 primary Drop Stitch high pressure chamber
- 2 low pressure residual chambers (wings)
Aluminium framework, assembled with push-pins
C50 carbon mast - 5 sections
Dacron 5.6 m² furling Sail - North Sails / Dacron and monofilm 6/4.80 m² reefable Sail - North Sails
Rudder and daggerboard - Marine CP
Rudder head - Die cast
Tiller & extension - Aluminium and foam
Blocks set - Harken
Fittings - Clamcleat
Toe strap rope - High density foam
Rigging - Polyester
Rechargeable low pressure electric pump 12/220V
High pressure manual pump - 2200cc

Specifications:
Norms : CE
Sailing category D
Boat weight (empty) :40 kg
Bags weight (including boat and pumps) :20 & 25 kg
Bags dimensions
Hull bag: 145 × 40 × 35 cm / 25kg
2nd bag: 110 x 40 x 25 cm / 20kg
Draught :75 cm
Maximum load : 150 kg / 330 lbs (1 adult + 1 kid)
Inflated hull dimensions :2.80 m x 1.50 m